The MicroJig Spacer which adds 25mm of cutting width, so 107mm of material can be safely ripped with the blade safely within the Gripper, away from hands and fingers.
The spacer adds an additional 25mm of Mircojigs green grip material, adding to the amount of material that is gripping and holding the workpiece pushing it down onto the table, in against the fence all while pushing it forward through the cut.
When the spacer is turned upside down, it can be moved up out of the way to avoid a router bit that has been set high so not to damage it during the cut. There is no Mircojig green grip material on this side.
Standard with MIC-GR200, and accessory for the MIC-GR200.
Made in the USA.