We have updated the look & product code of our DP-4132F (now DP-1500C), however be assured, all specifications of this machine are the same as our tried and tested DP-4132F.
This is the Carbatec heavy duty 12 speed pedestal drill press. It features easy to access opening to access the belts to quickly change to belts to get the appropriate speed for the material being drilled, and an adjustable light to help you see what is happening at the point of attack.
The large cast iron (470mm x 420mm) tiltable table will allow you to attach clamps, jigs and accessories to make drilling operations easier and safer. The table has a large winding handle, that once the tension is released, easily winds the table to the best position for the current job. Magnetic jigs, fixtures and fences are ideal for this table due to its large size and ample room to position them.
The cast iron base (450mm x 580mm) is appropriately sized for a machine this size providing a substantial footing and heft to deliver stability. The overall footprint of the machine is 620mm wide x 820mm deep allowing it to fit in most workshop situations.
The use of NVR switching on machine now is standard, with the switch being positioned above the chuck, within easy reach during working operations. The vertical travel levers are located just to the right of the switch, winding the chuck through the 120mm of chuck travel. The chuck has a 3mm to 16mm capacity, with the ability to drill a variety of materials using the speed range of 150 rpm to 2700 rpm.