New and improved design features 2-1/4" high jaws - a half inch higher than standard pipe clamps!
The clamping process is vital for most woodworking. Many woodworking workshops will have a selection of clamps, and some of these are most likely pipe clamps.
The clutch mechanism in the tail of the clamp allows it to be positioned along the length of the pipe and will not slip even with under the great amount of pressure required for clamping woodworking projects. The head threads onto the end giving a secure grip. This type of clamp offers the ultimate solution to clamping on a budget. Working with standard 20mm pipe, which you can purchase at your larger hardware stores in various lengths.
Extra-wide 2-1/2" foot provides exceptional stability and prevents tipover during setup. It won't rock on uneven bench surfaces! Higher base raises the pipe 1-1/2" above table to allow for greater handle clearance, so you won't have to position clamp handle off the edge of a bench.
Requires Galvanised Pipe in 3/4" BSP, or with the outside diameter of approximately 26.4mm - Commonly available pre-threaded from large hardware suppliers.