The Carbatec Cyclone Dust Extractor is the ideal addition to any workshop.
The cyclone removes a majority of the dust particles into the drum well before they have a chance of reaching the filter, where dust down to 1 micron in size is captured making for a safer work place for everyone. By removing most of the dust particles before they have a chance to clog up the filter, means the efficiency of the extractor is maintained. The pleated filter has a far greater surface area so while cleaning is still required, it is not required as much as a filter bag. Cleaning is done via a double paddle that removes the built up dust by friction and vibration. Cyclone Dust Collectors run at significantly lower CFM than an equivalent standard dust collector, but with a higher Static Pressure, and consistent CFM due to the efficient separation and collection of shavings, separate from the air filtration.
Both the whole unit and collection drum are mounted on casters making it easy to move and position where it is needed, and emptying the drum quick and efficient.
All of this is great, and now for the real benefit, activate the dust extractor from a distance with a remote rather than having to walk to it every time you need to start it up.